Rock wool products are applicable for facade insulation ,various curtain wall insulation of new buildings, reconstructed buildings, roofing insulation for various commercial buildings, industry workshop and public buildings,interior decoration and partition insulation.the fire resistant rock wool products are used for fire blocking of various buildings.The rock wool well insulated buildings are much more energy efficiency, fire save and thermal ,acoustic comfortable.
Product Features:
Building energy-saving :Rock wool is an efficient energy-saving material that can reduce the energy consumption of air-conditioning or heating more than 70%.
Fireproof : Rock wool raw materials from natural rock, is non-flammable products, fire does not produce toxic fumes and molten dripping. Applied to the building system to form a fire barrier, can delay the spread of the flame, in order to protect your personal safety and family property for valuable time.
Sound absorption and noise reduction : The tiny air gap formed by the slender fiber of rock wool makes it have high sound-absorbing and noise-reducing and flexible vibration-damping performance, so as to create a quiet space in this noisy world.
Health, environmental protection :Rock wool does not contain asbestos, CFC, HCFC, no mold, no microbial growth foundation. Rock wool has been recognized by the International Agency for Research on Cancer as non-carcinogenic.
Precautions :
1 primary wall and cement mortar leveling layer processing and embedded parts installed.
2 Construction Scaffolding should be erected firm, safety inspection. Scaffolding pole with the level of the wall and the wall, the corner of the spacing should meet the construction requirements.
3 The primary wall should be solid, dry surface, without cracking, hollowing, loose or efflorescence, cement mortar leveling layer bonding strength, flatness and verticality should be consistent with (Building Decoration Engineering Quality Acceptance Specification) GB50210 General plastering engineering quality requirements.
4 rock wool board exterior insulation construction, the grassroots and construction of the environment temperature is below 5 ℃ shall not be construction. In five or more windy weather and rain, snow may not be construction. During construction and after construction, effective measures should be taken to prevent rainwater scouring and sun exposure, and protective layers should be made in time. If sudden rain occurs during construction, measures should be taken to prevent the rain from flushing the wall; winter construction should be antifreeze measures according to relevant standards.
5 Before the construction of a large area, the same material, construction method and process model building wall should be adopted on site according to the regulations, and the construction can be carried out only after confirmed by all parties involved.
6 rock wool board construction, the workers should wear protective gear, good occupational health protection, and pay attention to construction safety.
7 rock wool insulation board system will be seized of the material should be sent to a qualified testing agencies to test, test before use.
8 rock wool board paste sticking method should be used or point sticky method, glue area should not be less than 50%. Rock wool board after the end of the adhesive, the insulation board should be the bottom of the grass-roots paste, rock wool board should be horizontal from bottom to top horizontal laying, and should be paved side of the anchor, the board should be close to the gap, the gap between the plates Not more than 2mm, such as the slit width 2mm, should be filled with insulation material processing, adjacent plate surface should be flush with the plate height difference of not more than 1.5mm.
9 All through-wall pipelines and components passing through rock wool panels shall be sealed with water-tight seals at the outlet of the same material.
10 If it is found that the veneer falls off during the construction, it should be timely bonded or anchored by means of anchors, and the construction of the outer surface should be timely carried out.